Adam Equipment SHS Series Specifications download pdf (Page 9)

3.3 BASIC

OPERATIONS

Power on and off

Press the [ON/OFF] button to turn the scale on or off. The display on the scale

will show the model capacity then countdown from 9 to 0 before displaying zero

weight.

Zero the scale

Press the [Zero] key so that the display shows zero.

Change the weighing Unit

Press the [Unit] key to change the weighing unit

Standard Hold (setting 1)

When the reading may not be perfectly stable or you cannot view a reading

easily you can press the [Hold] key to lock it. The reading will be locked and also

flash at the point you press the [Hold] button enabling you to view it when you

can. The Hold LED will also light up and once you have noted the reading a press

of the [Hold] key will return the scale to the normal weighing mode.

Peak Hold (setting 0)

Peak Hold is the highest weight reading registered by the scale when a weighing

takes place. Press the [Hold] key when the display is at zero and the Hold LED

will flash which denotes Peak Hold has been activated. When weight/force is

applied to the scale the display will also flash and lock the highest recorded

weight of that weighing process. This value and the Hold LED will remain flashing

on the display until the [Hold] key is pressed again at which point the scale will

return to normal weighing mode displaying the current weight on the scale.

Press [Hold] again to perform another Peak Hold weighing at any time.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Adam Equipment SHS Series Specifications Page 9