Adam Equipment SHS Series Specifications download pdf (Page 8)

Overload Warning

Please do not add any item that exceeds the maximum capacity of the scale.

When the display shows ”- - - - - ” remove the item to avoid damage to the load

cell and scale.

3.2 BATTERY

OPERATION

• The lithium battery will operate continuously for 20 hours before

requiring recharging. The scale will alert you that the battery is low on

charge when the Indicator LED above the battery symbol lights up.

• To charge the battery, unclip the battery cover on the rear of the scale

and insert the connector into the socket as marked. Plug the charger

into the mains power supply and wait until the LED on the charger

shows green. The battery is now fully charged.

• Charging time for a completely discharged battery is approximately 16

hours. A full battery pack is recommended to keep the scale

continuously operational.

• Only use the charger as supplied with the unit.

• The switch inside the battery cover must be in position A to make use

of the lithium battery.

• If using AA or NiMH batteries the switch must be in position B

• The scale will automatically power down after 30 minutes of non use to

further protect the battery.

• To replace the lithium battery pack please contact your dealer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Adam Equipment SHS Series Specifications Page 8