Adam Equipment GBC Series Specifications download pdf (Page 19)

P a g e 17 © Adam Equipment Company 2014

8.0 CALIBRATION

• The GBC/GFC scales are calibrated using metric weights and GBC/GFC-a

scales are calibrated using metric or pound weights depending on the

unit in use before calibration. See the Service parameters section for

more information.

• The scale will display a value of the weight to be used for calibration, this

value is the last weight used for calibration. You can enter a different

value, if desired.

• For entering Calibration, see section 7.0 Parameters

• When “F1” “CAL” is displayed, press [Tare].

• The display will then show "unLoAd" to request all weight be removed

from the platform.

• Press the [Tare] key to set the zero point.

• The displays will then show the calibration weight suggested, the value

is shown as an integer number, it is not possible to have fractions of a

kilogram or pound. For example:

LoAd 00004

KiLoS

• Place the calibration weight on the platform. If the calibration weight is

different from the value shown, Press [CE] to clear the current value then

enter the correct value.

• Press [Tare] to calibrate.

• When calibration is done the display will show “SPAn” “PASS”.

• Remove the weight. The scale will return to normal weighing.

• If an error message “SPAn” “FAIL” is displayed, then repeat the process.

• After calibration, the scale should be checked whether the calibration is

correct. If necessary, repeat calibration.

NOTE: GBC/GFC-a scales will have the lb or kg indicator on, to show the unit of the

weight requested. If the scale was in pounds before starting the calibration, the

weights requested will be in pound values or if the scale was weighing in kilograms

then metric weights will be requested.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Adam Equipment GBC Series Specifications Page 19