Adam Equipment MCW Service Manual

Adam Equipment Company Ltd 2012 Adam Equipment MDW MCW Service Manual Part No-

8 Adam Equipment Company Ltd 2012 Calibration of the new load cell will be required and a check for Repeatability, Off centre

9 Adam Equipment Company Ltd 2012 The MDW 160M relies on a lever system in the base using bearings and knife edges to transfer

10 Adam Equipment Company Ltd 2012

11 Adam Equipment Company Ltd 2012 Before calibrating the scale, you should ensure that you have a suitable known qu

12 Adam Equipment Company Ltd 2012 7. Check the calibration by putting the weight that you calibrated at back on the scale, if

13 Adam Equipment Company Ltd 2012 This indicator has 4 parameter settings that can be selected. 1. When the scale is in nor

14 Adam Equipment Company Ltd 2012 MDW 160M Part number Description Item No 7.00.1.0.0184 WEIGHING RULER 1 7.00.1.0.0134 S

15 Adam Equipment Company Ltd 2012

16 Adam Equipment Company Ltd 2012 MDW 250L Part number Description Item No 7.00.1.0.0143 BASE FRAME 1 7.00.1.0.0144 HEIGHT R

17 Adam Equipment Company Ltd 2012 MDW MCW 300L Part number Description Item No 7.00.1.0.0247 MDW 300L HEIGHT ROD SUPPORT (U

Adam Equipment Company Ltd 2012

18 Adam Equipment Company Ltd 2012

19 Adam Equipment Company Ltd 2012

20 Adam Equipment Company Ltd 2012 Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to

Adam Equipment Company Ltd 2012 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance

Adam Equipment Company Ltd 2012 ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 35 years experienc

1 Adam Equipment Company Ltd 2012 CONTENTS 1.0 PRODUCT DESCRIPTION ... 2 2.0 SPE

2 Adam Equipment Company Ltd 2012 The MDW series of health and fitness scales are available in 3 different models. The MDW 1

3 Adam Equipment Company Ltd 2012 MODEL CAPACITY AND DIVISION BASE SIZE mm MDW 160M 160kg x 0.1kg

4 Adam Equipment Company Ltd 2012 PROBLEM POSSIBLE CAUSES Poor weighing Performance Check for interference with

5 Adam Equipment Company Ltd 2012 To evaluate that the load cell signal output is correct you can make certain measurements.

6 Adam Equipment Company Ltd 2012 When replacing a load cell the correct type and capacity load cell should be selected, once

7 Adam Equipment Company Ltd 2012 MCW MCW and MDW L